Product ID:727A CENTARI ACRYLIC ENAMEL
MSDS Date:04/15/1987
FSC:8010
NIIN:00F003462
MSDS Number: BGTPP

E.I. DUPONT DE NEMOURS

WILMINGTON, DE 19898

Emergency Phone: (800) 441-3637

Info Phone: (800) 441-7515

Cage: 19898

E.I. DUPONT DE NEMOURS & CO., INC.

1635 WILMINGTON, DE 19898 US

Telephone: 800-441-3637

Cage: 19898

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SOLVENT NAPHTHA (LIGHT AROMATIC)

CAS: 64742-95-6

OSHA PEL 100 PPM

ACGIH TLV: NONE

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

RESIN, POLYMERIC

4.0 - 6.0

RTECS: 9999999VO

MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100)

CAS: 64742-88-7

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: GASTRO-INTESTINAL
DISTRESS. INHALATION: MAY CAUSE NOSE/THROAT IRRITATION. EYE
WATERING, HEADACHES, NAUSEA, DIZZINESS & LOSS OF COORDINATION ARE
SIGNS THAT SOLVENT LEVELS ARE TOO HIGH. SKIN /EYE: MAY CAUSE
IRRITATION OR BURNING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: NOSE/THROAT IRRITATION. EYE
WATERING, HEADACHES, NAUSEA, DIZZINESS & LOSS OF COORDINATION ARE
SIGNS THAT SOLVENT LEVELS ARE TOO HIGH. SKIN: REPEATED/PROLONGED
LIQUID CONTACT MAY CAUSE IRRI TATION W/DISCOMFORT & DERMATITIS.
OVEREXPOSURES TO SOLVENTS MAY LEAD TO PERMANENT BRAIN & NERVOUS
SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:LUNG OR BREATHING PROBLEMS.

First Aid:EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINS; CALL PHYSICIAN. SKIN: WASH WITH SOAP & WATER. IF IRRITATION
OCCURS, CONTACT PHYSICIAN. INHALATION: IF AFFECTED, REMOVE TO FRESH
AIR. I F BREATHING PERSISTS, OR OCCURS LATER, CONSULT PHYSICIAN.

Flash Point Method:CC
Flash Point:73-100F
Lower Limits:0.8%
Upper Limits:13.1%
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WATER TO COOL CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD UP. FULL PROTECTIVE EQUIPMENT, INCLUDING
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FINE MISTS OR SPRAYS MAY BE FLAMMABLE AT
TEMPERATURES BELOW THE FLASH POINT, BURN, & BE EXPLOSIVE.

Spill Release Procedures:VENTILATE AREA. REMOVE SOURCES OF IGNITION.
PREVENT SKIN CONTACT & BREATHING OF VAPOR. CONFINE AND REMOVE WITH
INERT ABSORBANT.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAME. CLOSE CONTAINER AFTER EACH USE. GROUND CONTAINERS WHEN
POURING. DON'T STORE >120F.
Other Precautions:WASH THOROUGHLY AFTER HANDLING & BEFORE EATING OR
SMOKING. DON'T SAND, FLAME CUT, BRAZE OR WELD DRY COATING W/OUT
NIOSH/MSHA APPROVED RESPIRATOR OR APPROPRIATE VENTILATION. DON'T
BREATHE OF VAPORS OR MISTS.

Respiratory Protection:IN CONFINED SPACES WEAR A POSITIVE PRESSURE,
SUPPLIED AIR RESPIRATOR (TC-19C). WEAR A PROPERLY FITTED NIOSH/MSHA
APPROVED PAINT SPRAY RESPIRATOR (TC-23C).
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:NEOPRENE
Eye Protection:SPLASH GUARDS, SIDE SHIELD
Other Protective Equipment:COVERALLS
Work Hygienic Practices:DON'T PERMIT ANYONE W/OUT RESPIRATOR PROTECTION
IN THE PAINTING AREA.
Supplemental Safety and Health
GAL/WT (#/GAL): 7.88 - 10.93

Boiling Pt:B.P. Text:54-302F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MISCIBLE
Percent Volatiles by Volume:48-67%

Stability Indicator/Materials to Avoid:YES
NONE REASONABLE FORESEEABLE
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, & OPEN FLAME
Hazardous Decomposition Products:CO, CO2, SMOKE

Waste Disposal Methods:DON'T ALLOW MATERIAL TO CONTAMINATE GROUND WATER
SYSTEMS. INCINERATE ABSORBED MATERIAL IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REQUIREMENTS. DON'T INCINERATE IN CLOSED
CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.